Some photos of the FirM Controller mounted in its intended housing.
Top 2 pics showing the front ,the leds on the left are the alive led + power led. The zone leds are grouped in pairs green = rxing and red = txing zone 1 on the left ......
Bottom 2 pics are rear shots showing the rj45 sockets .The 3.5mm sockets above the sockets are to take the tx signal out if say using at node 0. The db9 is for hv signals . The 3.5mm socket above it is hv ir and the other is ir out which goes to stick on emitter on hv. Zone 1 is on the RIGHT Zone 8 is on the LEFT.